Cladding Paint – Protect Exterior Walls, Metal & PVC

Refurbish Weathered Metal Cladding with Confidence

Crown Trade Protective Coatings Fast Drying Cladding Finish is a high-performance water-based system, specially developed for the refurbishment of pre-coated, weathered metal cladding. It enables surfaces to be restored to a clean, uniform appearance while providing long-term durability and resistance to mould growth.

Always refer to the product data sheet before use to ensure suitability and correct preparation.

Where to Use

Designed for commercial and industrial settings, this cladding finish is ideal for:

• Warehouses & Factory Units: Restore tired, faded metal panels with a quick-drying, anti-mould formulation.
• Outbuildings & Workshops: Apply over weathered, pre-coated cladding to extend surface life and improve appearance.
• Retail & Commercial Premises: Maintain a professional finish aligned with branding and site standards.

Surface Preparation

All surfaces must be:

• Dry and free from loose or flaking paint
• Cleaned using warm water and detergent to remove contaminants
• De-glossed via wet abrasion for maximum adhesion
• Rinsed thoroughly and allowed to dry

Rust must be fully removed, and all bare areas should be spot-primed with Crown Trade Protective Coatings High Build Rust Inhibiting Metal Primer before topcoat application.

Application Advice

Stir well before use. Apply using a brush, medium pile roller, or spray. If applying by airless spray, dilution up to 15% may be required. Always follow the full product data sheet instructions for best results.

Pair with quality exterior primers and preparation products and decorating tools for a long-lasting, professional finish.